VEVOR 4L Air Still Distiller

- 4L capacity – 4 liters of input liquid per batch
- 750W heating element – More powerful than Still Spirits (excellent for stripping)
- Air-cooled design – No water pump or glycol cooling required
- One-key start – Press button and go
- Electronic fan cooling – Aluminum radiator + automatic fan control
- Simple on/off switch – Power button only
- Automatic shutdown – Safety feature at 115°C
- Stainless steel internals – 304 SS boiler, cap, condenser coil (food-grade)
- Includes accessories – Carbon filters (3x), cleaning powder, collection jug
- Pot still design – Simple, beginner-friendly distillation method
- Compact countertop – Fits any kitchen counter; easy to store
- Affordable entry point – Best value air still on the market
- **Excellent for stripping runs** – Raw spirit extraction
- **Requires temperature control for spirit runs** – For refined, finished spirits

Physical Specifications:
- Capacity: 4L (1.1 US gallons / 4.2 Imperial pints)
- Internal Tank: 304 stainless steel
- Collection Jug: Plastic BPA-free (included; upgrade to glass recommended)
- Condenser Coil: 304 stainless steel
- Weight: 4.5kg
- Dimensions: Compact countertop size (~30cm tall with lid)
- Electrical Outlet: 110V/220V (model dependent)

Heating & Cooling:
- Heating Element: 750W
- Heating Range: Room temp to 115°C (automatic cutoff)
- Cooling: Electronic fan with aluminum radiator
- Cooling Method: Air-cooled (not water/glycol cooled)
- Fan Speed: Automatic (activated during distillation)
- Cooling Capacity: Condenses vapour at 30–50°C (fan-dependent)

Distillation Performance:
- Vapour Temperature: 80–100°C at boiling
- Condensation Temperature: 30–50°C (air-cooled)
- **Output per 4L Wash: VARIABLE—depends entirely on input wash ABV**
→ Higher ABV wash input = higher ABV/volume output
→ Lower ABV wash input = lower output
→ Not a fixed quantity (cannot be claimed)
- Power: 750W (more powerful than Still Spirits)
- Use Case: Excellent for stripping runs (raw spirits)
- **Requires temperature control for spirit runs** (refined, finished spirits)

Safety Features:
- Automatic thermal shutdown: >115°C cutoff
- Stainless steel construction: No leaching into spirits
- BPA-free plastic: Collection jug material

Heating Control (Important):
- Power button: ON/OFF control only
- No temperature dial or adjustment
- No precise control: Element cycles on/off at a fixed internal thermostat
- Heating behavior: 750W element heats to a preset temperature, then cuts off
- Thermal cycling: Results in surging distillate output (fast/slow drips)
- **Temperature control only possible with external controller (highly recommended)**

Electrical:
- Power: 750W
- Voltage: 110V or 220V (check model)
- Plug Type: Standard (US, UK, EU—model dependent)

Spirits & Distilled Beverages:
- Gin
- Whiskey
- Vodka
- Brandy
- Rum
- Liqueurs & cordials
- Herbal spirits
- Absinthe
- Aquavit

Water & Essential Products:
- Distilled water
- Essential oils
- Rose water & hydrosols
- Herbal extracts

WHO USES THIS:
- Small-batch recipe developers
- Herbal extract makers
- Essential oil enthusiasts
- Anyone wanting pure distilled water

Pairs with (Essential Upgrades):

- 2400W Power Controller
→ Better heating control for slow, even alcohol distillation
→ Reduces cycling/surging common in stock 750W element

- Temperature controller (external, e.g., RAPT, Inkbird)
→ For precise fermentation control during mashing phase
→ Works with jug to maintain exact heat

- Thermometer (pocket or digital)
→ Monitor wash temperature before distillation
→ Verify collection jug temperature during run

Pairs with (Fermentation/Preparation):
- Wash recipe ingredients (grain, fruit, sugar, yeast)
- Fermentation vessels (carboys, food-grade buckets)
- Thermometer (for fermentation monitoring)
- Airlock & grommet (for safe fermentation)
- Hydrometer & ABV meter (to measure alcohol %)

Pairs with (Finishing):
- 750mL Glass Spirit Bottles with cork
→ Bottle your finished spirits professionally

- Copper Packing Mesh
→ For re-distillation to remove sulfides (advanced)

- Carbon filters (3x included)
→ Polish distillate for cleaner taste

- Silicone tubing (if adding external cooling)
→ For water jacket modifications (advanced users)

Compatible with:
- All fermented wash types (grain, fruit, sugar, molasses)
- All standard yeast types (distiller's, wine, ale)
- Botanicals for infusion (gin, herbals)
- Standard kitchen electrical outlets (110V/220V models)
- Any glass collection vessel (not metal)

Does NOT require:
- Water pumps (air-cooled design)
- Glycol or cooling fluid
- Special plumbing
- Condenser attachments (built-in)
- Additional cooling equipment

Q: How much finished alcohol will I get from one batch?
A: Output depends entirely on your input wash ABV. A 20% ABV wash will
produce more finished alcohol than a 10% ABV wash from the same still.
You cannot claim a fixed output. The VEVOR distills whatever you put in—
the efficiency (ABV recovery %) varies by use case (stripping vs. spirit run).

Q: How long does one batch take?
A: Heating time varies depending on ambient temperature and starting liquid
temperature. Total time from filling to finished batch depends on wash type
and ABV. Heating the boiler, running the distillation, and collecting output
will vary with conditions.

Q: Can I make high ABV spirits?
A: Output depends on input ABV. The 750W element is powerful and excellent
for stripping runs (converting low-ABV wash into high-proof raw spirit).
For refined spirit distillation, use a temperature controller to smooth
out the heating cycles and improve quality.

Q: Do I need a water pump or cooling system?
A: No. The VEVOR air still is air-cooled. Just plug it in. The electronic
fan and aluminum radiator do all the cooling work.

Q: Should I upgrade to a glass collection jug?
A: Yes, highly recommended. The included plastic jug works, but plastic can
leach subtle flavors into high-proof spirits. A 1L Pyrex or glass jar
collects the distillate perfectly and produces cleaner results.

Q: What's the difference between this and Still Spirits air still?
A: Both are 4L air stills with similar output. VEVOR costs less; Still
Spirits costs ~3x more. VEVOR is solid for beginners/intermediate;
Still Spirits is popular among serious hobbyists. Not 3x better—mostly
brand loyalty and build quality.

Q: Can I make whiskey with this?
A: Yes, but it's a pot still, not a reflux still. Your whiskey will have
more "flavor" and "character" than high-proof reflux whiskey. Many
prefer the taste. Age the spirit in oak to round out flavors.

Q: Can I make gin?
A: Yes. Infuse botanicals in a neutral spirit, then distill for a clean gin.

Q: What wash should I use?
A: Use our fermentation calculator to determine the right wash type for your spirit.

Q: How do I clean it between batches?
A: 1. Let it cool completely
2. Empty any remaining liquid
3. Fill with water, run a "water distillation" cycle (flushes internals)
4. Use included cleaning powder for mineral buildup
5. Rinse thoroughly
6. Air dry or wipe dry before next use

Q: Can I distill water with this?
A: Yes, absolutely. It's equally good for water distillation. Same specs
apply—produces very clean, pure water. Popular for humidifiers, labs,
and drinking water.

Q: Can I control the temperature precisely?
A: No. The VEVOR has only an on/off switch—no temperature control built in.
The element heats at full 750W until an internal thermostat cycles it off,
creating thermal surging (drips fast, then slow, repeat).

For any temperature control and smooth, consistent distillation, use an
external temperature controller. This is essential if you want good results.
Cost: ~$50–100 for a good controller.

Q: Is this a reflux still?
A: No. It's a pot still (simple distillation). Reflux stills are more
complex and produce higher-proof spirits. The air still produces
flavorful pot still spirits, which many prefer for character.

Q: Will this produce high-proof neutral spirits?
A: Up to 60% ABV before dilution, but you won't achieve the purity of
reflux distillation. For neutral vodka, you'll need a reflux still or
multiple distillations through this unit.

Q: What's the drawback of air cooling?
A: Slower distillation times and less efficient heat rejection than
water-cooled stills. But for home batches, this is not a problem.

Q: Can I re-distill spirits to make them smoother?
A: Yes. You can take spirits from the first run and distill again to remove
sulfides/flavors and increase proof. Each re-run gets cleaner.

Q: Do I need copper packing mesh?
A: No. But you can add a copper scrubber directly to the pot during a spirit
run to help remove sulfides (rotten egg/match strike flavors). Optional.

Q: Is this safe?
A: Yes, with proper use. The automatic thermal shutdown (>115°C) prevents
overheating. Never seal the boiler (always leave vented). Never leave
unattended while hot. Follow all included safety instructions.

Q: Where is it made?
A: VEVOR is a Chinese manufacturer. Products are widely available in
Australia, US, EU, etc. Solid reputation for value and durability.

Q: What's the warranty?
A: Typically 1–2 years depending on region. Check your local VEVOR site
for warranty details. Customer service is responsive.

Check the manual here.

AFTER EVERY RUN:

Immediate Cleanup (while warm):
1. Let the still cool to room temperature (do NOT force cool with water)
2. Empty any remaining wash from the boiler
3. Remove the collection jug
4. Rinse the boiler with warm water 2–3 times
5. Empty and rinse the condenser section

Deep Cleaning (weekly or monthly):

Water Distillation Flush:
1. Fill the boiler 3/4 full with distilled or tap water
2. Install the head and turn on the still
3. Run until the collection jug fills with water
4. This flushes internal piping and removes residue
5. Let cool and empty

Mineral Buildup:
1. If you notice white deposits inside the boiler, use the included
cleaning powder
2. Mix cleaning powder with water per instructions
3. Run the still with cleaning solution for 30 minutes
4. Drain, rinse thoroughly with distilled water 2–3 times
5. Run a water flush to ensure no residue

Component Care:

Fan:
- Check monthly for dust/debris
- Gently blow out with compressed air if dusty
- Do NOT wash the fan; it's electronic

Collection Jug (Plastic—if using):
- Wash with warm soapy water after each use
- Avoid dishwasher (dishwasher detergent can leave residue)
- Air dry completely
- Replace if scratched or cloudy (residue buildup)

Collection Jug (Glass—recommended upgrade):
- Wash with warm soapy water
- Can use dishwasher (gentle cycle)
- Dry immediately to prevent water spots
- More durable; lasts indefinitely

STORAGE:

Between Batches:
- Ensure still is completely dry inside and out
- Leave the boiler uncovered (prevents moisture trapping)
- Store in a cool, dry place (not damp basement)
- Plug is unplugged
- Collection jug is stored separately, empty and dry

Long-Term Storage (weeks or months):
1. Run one full water flush cycle
2. Ensure all interior is dry
3. Leave components disassembled if possible (allows air circulation)
4. Cover lightly with cloth (protects from dust, allows airflow)
5. Check monthly for moisture (especially in humid climates)

TROUBLESHOOTING:

White/Cloudy Deposits Inside Boiler:
→ Mineral buildup from tap water
→ Solution: Use included cleaning powder per instructions

Slow or No Dripping During Run:
→ Condenser clogged or temperature set too high
→ Solution: Ensure fan is running; check temperature; run water flush

Fan Makes Noise:
→ Normal for older stills; fan works hard to cool
→ Solution: Blow out fan with compressed air to remove dust

Still Won't Turn On:
→ Power issue or thermal cutoff activated
→ Solution: Check outlet; let cool completely; check electrical cord

LONGEVITY TIPS:

2. Run water flushes between alcohol batches
3. Never seal the boiler (always vent)
4. Never leave unattended while running (safety + monitoring)
5. Upgrade to glass collection jug for better results
6. Consider external power controller for precise heat control
7. Check and clear fan monthly
8. Store dry; check for moisture before each use